Price List
| Part No. |
Part Description |
Price |
|
|
Well bar sets |
|||
|
101 |
Complete Set - three size well bars (18mm, 24mm,30mm), 6 small chucks, 4 large chucks, 4 over-chuck freezing blocks, chuck bin, 16 dispensing slides, cutting board/freezing griddle, elevated freezing block, angled embedding forceps and accessories. |
 |
$1,750.00 |
| 102 | Complete set - For Ames/Tissue Tek cryostats. Same as above but a 32 X 28 well bar is substituted for the 30 mm well bar and the 36 x 24 rectangular chuck is substituted for the large chuck which will make blocks too large for the Tissue Tek / Ames type cryostat. Includes chuck adaptor to fit Tissue Tek / Ames type cryostat. |
 |
$1,850.00 |
|
111 |
Small Embedding Well Bar Set - one 18 mm well bar, 4 small chucks, 2 over-chuck freezing blocks and 8 dispensing slides. Accessories included. |
 |
$529.00 |
| 112 | Medium Embedding Well Bar Set - one 24 mm well bar, 4 small chucks, 2 over-chuck freezing blocks and 8 dispensing slides. Accessories included. |
 |
$529.00 |
|
113 |
Large Embedding Well Bar Set - one 30 mm well bar, 4 large chucks, two over chuck freezing blocks and 8 dispensing slides. Accessories included. |
 |
$569.00 |
| 114 | 24/30 well bar set- One well bar with (2) 24 mm wells and (2) 30 mm wells, 2 large chucks , 2 small chucks, two over chuck freezing blocks and 8 dispensing slides. |
 |
$564.00 |
| 115 | 50 x 30 mm well bar set - One 50 x 30 mm well bar, and two 55 x 35 mm chucks. |
 |
$391.00 |
| 116 |
20 x 20 deep
well bar set Set
includes one 20 x 20 deep well bar, two small chucks, two over chuck
freezing blocks and 8 dispensing slides.
|
 |
$529.00 |
|
119 |
Freezing Griddle / Elevated Freezing Block Set - includes epoxy-coated forceps, putty knife and extra elevating bars. |
 |
$260.00 |
|
Embedding Well Bars - One inch thick stainless steel. |
|||
| 121 | 18mm- 4 wells |
 |
$235.00 |
| 122 | 24mm- 4 wells |
 |
$235.00 |
| 123 | 30mm-3 wells |
 |
$235.00 |
| 124 | 32 x 24mm rectangular wells for Tissue Tek cryostats -3 wells |
 |
$235.00 |
| 125 | 30mm and 24mm-2 wells each |
 |
$250.00 |
| 126 | 50 x 30 mm well bar - Section completely fills a standard slide |
 |
$235.00 |
| 127 |
20 x 20 deep well bar - Two 20 mm. wells are 6 mm deep and two wells are 9 mm deep. Ideal for research applications such as re-embedding snap frozen blocks and embedding fresh whole small animal organs. Using refrigerated embedding medium will maximize speed and prevent thawing of snap frozen tissues. |
 |
$235.00 |
| 128 |
24 x 24 deep well bar-Two 24 mm. wells are 6 mm deep and two wells are 9 mm deep. Ideal for research applications such as re-embedding snap frozen blocks and embedding fresh whole small animal organs. Using refrigerated embedding medium will maximize speed and prevent thawing of snap frozen tissues. |
 |
$235.00 |
| 129 | 10 mm well bar - Four 10 mm square wells. Two wells are 4.0 mm deep and 2 wells are 6.0 mm deep. Designed for small specimens when multiple sections need to be placed on a single slide. This well freezes in ten seconds at -24C. Useful in both clinical and research applications. |
 |
$235.00 |
|
Stainless steel chucks |
|||
| 131 | Small Chuck - 28mm square Stainless steel |
 |
$58.00 |
| 132 | Large Chuck - 36mm square Stainless steel |
 |
$68.00 |
| 133 | Large chuck - 36 x 28 mm rectangle Stainless steel for use with well bar # 124 |
 |
$68.00 |
|
134 |
Extra large chuck - 55 X 36 mm rectangle stainless steel |
 |
$78.00 |
| Additional Parts | |||
| 141 | Over-Chuck Freezing Block |
 |
$22.00 |
| 142 |
Chuck Bin
- A sturdy little stainless steel box to shelter you
chucks while staying cold in the cryostat. Loose fitting unattached
cover for easy access.
|
 |
$24.00 |
| 143 | Dispensing Slides (eight) - This is how we put the pizza in the oven. |
 |
$18.00 |
| 144 | Angled flat embedding forceps - Used for flattening broad pieces as they come off the dispensing slide. Each piece is handmade from a standard low cost angled forceps. They are heated, bent to approx. 60 Degrees, ground and polished. No two are alike! but they do the job. |
 |
$25.00 |
| 151 | Embedding shelf - 4 x 8 ''
|
 |
$80.00 |
| 152 | Embedding shelf - 4 x 8" 3 piece for temporary or permanent installation. Includes foam sealing strips. Fits Leica and Micron cryostats. |
|
$175.00 |
| 153 | Embedding shelf - 4 x 8" 3 piece for temporary or permanent installation.. Fits Shandon cryostat. | $180.00 | |
| 161 | Well Bar Storage platform ( fits Leica 1850) |
 |
$50.00 |
| 171 | Chuck adaptor for Shandon |
 |
$100.00 |
| 172 | Chuck adaptor for Tissue Tek |
 |
$100.00 |
| 175 | Custom adaptors: The chucks have a stem 2.0 X .9 cm and fit in Leica and most Microm cryostats.. Shown above are adaptors for Shandon and Ames / Tissue Tek cryostats . I will be happy to make an adaptor for any cryostat that has enough travel between the block and the knife to accommodate the 2 cm thick adaptor. Contact me for further details. | Price will vary with complexity. | |
| Frozen section brushes These are flat white boar bristle brushes which I cut at an angle. You can get these yourself in an art supply store for about the same price and make them yourself. These are very stiff and prevent the frozen section from curling through the brush. |
|
||
| 181 | Packet of four brushes: Two # 1 (3/8 inch angle cut) and two #2 (1/4 inch angle cut) | $18.00 | |
| 200 | Peters' Bone Vise Designed for holding bone specimens when cutting with hand or power saw. Cradle style angle vise rotates between 0 and 90 degrees. 4 x 2 1/2" jaws opens 3 " wide. Mounted on a 12" Corion platform with heavy duty handles for easy transport and cleaning. Wt 25lbs. |
|
$750.00 |
|
Embedding shelf and cryostat accessories price varies by brand. Systems will be offered for a 30 day no obligation trial period. "Creative invoicing " to avoid capital equipment delays is available. |